Application Instructions:
STAHLS' DIGITAL FLOCK TRANSFERS

Please note this product is DISCONTINUED.

1) Set machine temperature to 175c/350f.
2) Pre-heat bottom platen for 60 seconds.
3) Pre-press Garment for 3-5 seconds to remove any moisture/residual chemicals.
4) Remove transfer from carrier and place in position on garment. Cover with Teflon glass cover sheet and press with firm pressure for 12 - 15 seconds.
5) Remove the cover sheet and allow transfer to cool so adhesive can cure .
6) Digital flock transfers can be ironed over.

Failure to follow application instructions may result in poorly applied transfers.