Application Instructions:
STAHLS' SOLUTION REFLECTIVE COLOURED

For full product information please click here.

1) Remove protective plastic liner on adhesive side before cutting. Cut the design in reverse/mirror image.
2) Set machine temperature to 150C/300F.
3) Pre-press garment for 5 - 10 seconds to remove any moisture/residual chemicals.
4) Use light/medium pressure and heat apply for 5 seconds. Remove clear carrier warm (not hot or cold). Re-press using a cover sheet of either teflon glass or kraft paper for a further 5 seconds, remove cover sheet warm.
For 2 colour application:
Use light/medium pressure and heat apply base colour for 5 seconds. Remove clear carrier warm (not hot or cold). Place face colour on top of base colour and re-press using light/medium pressure for a further 10 seconds. Remove clear carrier warm.
5)Care: Turn garment inside out, cold wash. Do not use detergents or soakers that containing bleach or bleach particles. Line dry. Do not iron directly on graphic.

Failure to follow application instructions may result in poorly applied transfers.