Application Instructions:
STAHLS' SOLUTION FLEX CLEAR
STAHLS' SOLUTION FLEX AIRTECH

For full product information please click here.

1) Set machine temperature to 135c
2) Print designs in reverse/mirror, remove excess film, no masking is required.
3) Pre-press garment for 5-10 seconds to remove any moisture/residual chemicals.
4) Place Stahls' Solution Flex Transfer face down in in desired position.
5) Use a Light/Medium, pressure and heat apply for 14 seconds. Remove backing paper hot.

Failure to follow application instructions may result in poorly applied transfers.
Do not iron directly on transfers.