-Stahls' Light Film -Stahls' Thermo Film -Stahls' Ultra Film -Stahls' Thermo-Stretch -Stahls' Thermo-Grip -Stahls' Ezy-Breathe -Stahls' Cad-Cut Sub Block -Stahls' Solution Reflective Coloured -Stahls' Solution Sparkle -Stahls ID Film -Stahls' FX Film

-Stahls' Solution Flex White -Stahls' Solution Flex Clear -Stahls' Solution Flex Airtech -Stahls Solution Sub Block -Stahls' Solution Metallic

-Stahls' Transplus -Stahls' Transtuff

Cutter Guidelines
 

Material	Cutter/Printer (Information for Roland)	Cut Speed (Cm per sec)	Gram Force
Thermo Film	CX24, GX24, CX300	50	160g
	SP300V, SP540V	30	80/110g

Ultra Film	CX24, GX24, CX300	50	160g
	SP300V, SP540V	30	80/110g

Light Film	CX24, GX24, CX300	50	130g
	SP300V, SP540V	30	60/80g

Thermo Stretch	CX24, GX24, CX300	50	90g
	SP300V, SP540V	30	30/50g

Ezy-Breathe	CX24, GX24, CX300	50	130g
	SP300V, SP540V	30	60/80g

Cad-Cut Sub Block	CX24, GX24, CX300	50	140g
	SP300V, SP540V	30	70/90g

Cad-Cut Flock (req. flock blade)	CX24, GX24, CX300	50	180g
	SP300V, SP540V	-	-

Solutions Reflective	CX24, GX24, CX300	50	130g
	SP300V, SP540V	30	60/80g

Solutions Flex White	CX24, GX24, CX300	-	-
	SP300V, SP540V	30	45g

Solutions Flex Clear	CX24, GX24, CX300	-	-
	SP300V, SP540V	30	40g

Solutions Flex Airtech	CX24, GX24, CX300	-	-
	SP300V, SP540V	30	40g

Solutions Puff Fade	CX24, GX24, CX300	-	-
	SP300V, SP540V	30	50g

Solutions Sub Block	CX24, GX24, CX300	-	-
	SP300V, SP540V	30	85g/90g

Solutions Metallic	CX24, GX24, CX300	-	-
	SP300V, SP540V	30	85g/90g

Please note: All cutter guidelines are based on tests we believe to be reliable. However we can not guarantee performance for conditions not under the manufactures control. Before using any products, please determine the suitability of the product for it's intended use.
The uses assumes all risk and liability whatsoever in connection with the use of this product. Sellers only obligation shall be to replace such quantity of the product proven to be defective by fault of the manufacturer.

Order Forms and Information Sheets (PDF)